H.C.B-A1689 BENZ (M272/M273) CAMSHAFT HOLDING TOOL -Auto repair tools

 

Product Description : 

2016  BENZ (M272/M273) CAMSHAFT HOLDING TOOL

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1689

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* Unique tool designed to lock the left intake cam in place while servicing the cam chain drive system, and avoid the possibility of cam rotation causing damage to the engine by its simple locking mechanism. 

* Application: M272/M273 engines

More info please link: www.hcb-autotools.com 

H.C.B-A1688 MINI COOPER FUEL LINE DISCONNECT TOOL -Auto repair tools

 

Product Description :
2016  MINI COOPER FUEL LINE DISCONNECT TOOL

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1688

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* Features:

Used to disconnect the fuel line from the high pressure fuel pump that is driven by the mechanical connection to the intake camshaft.

Application: 2007-2013 Mini Cooper Turbo models.

BMW OEM no.ref.: 130250

***WARNING*** 

If the two little release tabs that stick out have been broken off the fuel line, The A1688 release pins are not long enough to depress the inner tabs. The only way to remove the fuel line at this point is to use two small screw drivers and depress on both sides of the fuel line at the same time to release the line from the pump. You must replace the fuel line at this point.

***Some 2010.5-2011 Models, You Need To Loosen The 14mm Flare Nut On The Fuel Rail Feed Line And Remove The Lower 8mm Fuel Pump Retaining Bolt To Use The Tool.***

More info please link: www.hcb-autotools.com 

H.C.B-A1611 STEERING FIXED BASE -Auto repair tools

 

Product Description :
2016  STEERING FIXED BASE

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1611

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* This tool is designed to fix the steering wheel.

* When the front wheels of the vehicle are incorrect, 

  you can use this tool to align the steering wheel and the front wheels. 

* After the steering box is removed, it will idle run. 

  If you don’t fix the steering wheel, it will damage the internal coil of the airbag. 

  So this is the necessary tool!

More info please link: www.hcb-autotools.com 

H.C.B-A1610 VOLVO (FM) CRANKSHAFT FRONT OIL SEAL INSTALLER -Auto repair tools

Product Description :
2016  VOLVO (FM) CRANKSHAFT FRONT OIL SEAL INSTALLER 

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1610

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* If you don’t use special tool to install oil seal. 

 It might causing oil seal bad install and leak oil.Then you will need to extract and install the part again.

This tool can make installing quickly and easily.

* Instruction: Put the tool on the crankshaft, hit the handle until finish installing.

* OEM ref. no.: 88800021, 9992000

* Application : D16F

More info please link: www.hcb-autotools.com 

H.C.B-A1609 VOLVO (FM/FH) DIFFERENTIAL MAINSHAFT BEARING INSTALLER -Auto repair tools

Product Description :
2016  VOLVO (FM/FH) DIFFERENTIAL MAINSHAFT BEARING INSTALLER  

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1609

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* Instruction: Put the tools on the top bearing. Use hydraulic press push the tool. Then you can finish installing the bearing.

* OEM ref no.: 9996759

* Application: VOLVO FH/FM

More info please link: www.hcb-autotools.com 

H.C.B-A1603 IVECO 3.5/ 7 TONS TIRE NUT CROSS WRENCH (27mm) -Auto repair tools

 

Product Description : 

2016  IVECO 3.5/ 7 TONS TIRE NUT CROSS WRENCH (27mm)  

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1603

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* Instruction: This tool is used to remove/ install the rear/ front tire nuts of IVECO 3.5 tons and 7 tons truck.

* Application: IVECO 3.5 tons and 7 tons truck

More info please link: www.hcb-autotools.com 

H.C.B-A1601 IVECO 3.5/7 TONS OIL FILTER WRENCH(Dr. 1/2",10 FLUTES, 94.5 mm) -Auto repair tools

Product Description :
2016  IVECO 3.5/7 TONS OIL FILTER WRENCH(Dr. 1/2",10 FLUTES, 94.5 mm)  

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1601

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* Size: 94.5mm x 10 FLUTES x 1/2" DRIVE

* Application: IVECO 3.5 ton and 7 ton

More info please link: www.hcb-autotools.com 

H.C.B-D1473 VW/ AUDI CAMSHAFT CONTROL VALVE 1.8/2.0 TFSI SOCKET -Auto repair tools

Product Description :
2016  VW/ AUDI CAMSHAFT CONTROL VALVE 1.8/2.0 TFSI SOCKET  

 ‧Product Info‧ 

Model/Item No. : H.C.B-D1473

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* Used for removal and installation of camshaft control valve on 1.8 and 2.0 generation III TFSI engine.

* Application: Audi A4 2008 >, Audi A5 Cabriolet 2009 >, Audi A5 Coupe 2008 >, Audi Q5 2008 >, Audi A3 2012 > 

* Applicable engine: 4-cyl. 1.8L/2.0L 4V TFSI direct injection engine (generation III) 

* VW OEM no. ref: T10352/2 

More info please link: www.hcb-autotools.com 

H.C.B-A1448 SAF BUSH REMOVAL/INSTALLATION TOOL KIT -Auto repair tools

Product Description :
2016  SAF BUSH REMOVAL/INSTALLATION TOOL KIT  

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1448

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* Use this tool can remove and install the bush with less labor and time.

  DO NOT use an impact wrench to turn the pivot bushing replacement tool.

More info please link: www.hcb-autotools.com 

H.C.B-A1117-6 VIRAGE TRANSMISSION TOOL -Auto repair tools

Product Description : 

2016  VIRAGE TRANSMISSION TOOL  

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1117-6

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* VIRAGE TRANSMISSION TOOL 

More info please link: www.hcb-autotools.com 

H.C.B-A1022-(I) VW/AUDI FAN CLUTCH WRENCH (46 mm) -Auto repair tools

Product Description :
2016  VW/AUDI FAN CLUTCH WRENCH (46 mm) 

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1022-(I)

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* The hardest material, S45C, and heat treated.

* Shiny surface treatment, just like mirror.

* The best quality in the field.

* For holding fan pulley while loosening or tightening screws on viscosity fan coupling. 

* Applicable: VW/AUDI

More info please link: www.hcb-autotools.com 

H.C.B-A1592 SPECIAL SOCKET FOR TRUCK (Dr. 1", 12 POINTS, 90mm) -Auto repair tools

Product Description :
2016  SPECIAL SOCKET FOR TRUCK (Dr. 1", 12 POINTS, 90mm) 

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1592

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* Application: IVECO truck

* Size: Dr. 1", 12 POINTS, 90mm

More info please link: www.hcb-autotools.com 

H.C.B-A1585 PORSCHE CAYENNE/ AUDI Q7/ VW TOUAREG/ BMW X5 HUB PULLER (EXTRA LARGER) -Auto repair tools

 

Product Description : 

2016  PORSCHE CAYENNE/ AUDI Q7/ VW TOUAREG/ BMW X5 HUB PULLER (EXTRA LARGER) 

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1585

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* PCD (Pin Centre Diameter) from 110mm to 160mm

More info please link: www.hcb-autotools.com 

H.C.B-A1584 VW/ AUDI CAMSHAFT DIESEL ALIGNMENT TOOL -Auto repair tools

Product Description :
2016  VW/ AUDI CAMSHAFT DIESEL ALIGNMENT TOOL

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1584

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* For adjusting valve timing, and working on the crankshaft, valve train, 

  timing belt replacement……, etc. without removing of the valve cover.

* Special design to set camshaft in the correct position for diesel engine.

* Application: 1999-2003 Volkswagen Polo, Golf, Bora, Beetle,   Caddy (at ~ 04), 

  Audi, Skoda and Seat with 1.9 L Diesel TDI and SDI engines 66 KW and 81 KW

* VW OEM no. ref.: T10098A

More info please link: www.hcb-autotools.com 

H.C.B-A1582 VOLVO (FM) TRANSMISSION OIL TUBE NUT WRENCH (74 mm) -Auto repair tools

Product Description :
2016  VOLVO (FM) TRANSMISSION OIL TUBE NUT WRENCH (74 mm) 

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1582

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* Applicable: VOLVO FM12

* Size: Dr. 1/2", 6 Points, 74mm

More info please link: www.hcb-autotools.com 

H.C.B-A1581 VOLVO (FM) CRANKSHAFT REAR OIL SEAL INSTALLER -Auto repair tools

 

 

Product Description :
2016  VOLVO (FM) CRANKSHAFT REAR OIL SEAL INSTALLER 

 ‧Product Info‧ 

Model/Item No. : H.C.B-A1581

Country of Origin :
Taiwan
Brand :
H.C.B
Product Specifications /Features : 

* To prevent the crankshaft rear oil seal from damage when installing it. 

  It is very easy to damage oil seal without using this tool.

* Applicable: VOLVO truck FM12 (380),(420),(430), year 00-07

* Oil Seal Genuine no.: 85108352

More info please link: www.hcb-autotools.com